Electrolux W4400H Service Manual page 168

168
Secure the cylinder units using four bolts and
4
nuts.
It is important to fit four washers (each 5 mm
thick) between each cylinder unit and the
machine frame (see illustration).
Fit the four corner posts, one for each corner of
5
the machine, using the bolts which secure the
machine feet to the floor. Adjust the clearance
between the upper part of each corner post and
the machine so it is 14 mm.
For machines with tilt both forwards and back-
6
wards:
Fit two pneumatic position sensors on two of the
machine feet: at left-hand front and right-hand
rear, diagonally opposed. The position sensors
are to be fitted using the inner two fastening
bolts of the feet, mounted on the corner posts
just installed.
Tilt function (Optional equipment)
4
4 washers
5
14 mm
6
Position sensors
4 washers
45
55
6046