Electrolux W4400H Service Manual page 103

DISPLAY ACTUAL TEMPERATURE
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER
TEMPERATURE IN °C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
LEVEL HIGH
MIDDLE TEMPERATURE COOL-DOWN 70 °C
DEFAULT MOTOR ON TIME
DEFAULT MOTOR OFF TIME
Y/N
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER
TEMPERATURE IN °C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL- DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
LEVEL HIGH
MIDDLE TEMPERATURE COOL-DOWN 70 °C
DEFAULT MOTOR ON TIME
DEFAULT MOTOR OFF TIME
FLUSH DELAY TIME
1
4
7
Programme unit
Y
Y
N
Y
Y
N
175
0
15
150
175
0:12
0:0
Answer Yes (Y) or No (N).
Press .
Y
N
Y
Y
N
175
0
15
150
175
0:12
0:0
0:06
Use the numeric keys to
enter the value.
2 3
5 6
If you make a mistake while
entering digits:
8 9
Press ERASE.
0
When you have finished:
Press .
No access to standard programs
Here you determine whether the user will have ac-
cess to the machine's standard programs (numbe-
red 991-999) or not.
If you answer Yes (Y):
The user will not have access to the standard
programs.
If you answer No (N):
The user will have access to the standard
programs.
Water level for quick cool-down
Here you determine the level to which the machine
fills with cold water for quick cool-down.
When you are creating a wash program, in the mo-
dule "COOL-DOWN" there is an option for program-
ming "QUICK COOL-DOWN".
Quick cool-down means that the machine will fill
with cold water to a higher level.
This function is used mainly for reducing the tempe-
rature of the water before it is discharged.
For information on the levels used for the various
machines, see the manual "Programming, PCS
Program Control Unit".
Water level
Level, quick cool-down
Water level during wash
10
The machine fills
with cold water
Time