Electrolux W4400H Service Manual page 101

CHANGE WASH PROGRAM ALLOWED
AUTO RESTART ALLOWED
ADJUST SPIN SPEED ALLOWED.
DISPLAY REMAINING TIME
DISPLAY ACTUAL TEMPERATURE
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER
TEMPERATURE IN °C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
Y/N
AUTO RESTART ALLOWED
ADJUST SPIN SPEED ALLOWED.
DISPLAY REMAINING TIME
DISPLAY ACTUAL TEMPERATURE
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER Y
TEMPERATURE IN °C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
LEVEL HIGH
Y/N
Programme unit
Y
Y
Y
Y
Y
Y
N
Y
Y
N
175
0
15
150
Answer Yes (Y) or No (N)..
Press .
Y
Y
Y
Y
Y
N
Y
N
175
0
15
150
175
Answer Yes (Y) or No (N).
Press .
Machine not heated
Here you determine if the machine is to heat the
water to the required temperature before the time
the wash sequence starts, or if the wash time of
the sequence is to begin directly after water filling.
991 NORMAL 95°C STD
PROGRAM STEP: MAIN WASH
STEP TIME:
MACHINE NOT HEATED
REMAINING TIME:
DRUM SPEED:
CHANGE °F/°C
AUTO RESTART
If you answer Yes (Y):
The machine will not wait for the water to heat,
but will begin to count down the time of on the
wash sequence immediately.
The temperature of the water will, however, still
be monitored and adjusted during filling if the
answer Yes has been inserted for the question
"TEMPERATURE CONTROL OF WATER" (see
next question).
If the answer "Yes" is in place (Yes is the default)
for the question "HEATING RELAY ON WHEN
NOT HEATED" (see "Settings 2") the heating relay
(if machine is equipped with one) will switch on.
This means you can heat the water while wash
action is in progress. If you do not want the
heating relay to switch on, you must insert the
answer "No" for the question "HEATING RELAY
ON WHEN NOT HEATED".
If you answer No (N):
The machine will heat the water to the set
temperature before the count down of the wash
sequence begins. The temperature values will be
shown on the display (if you have "allowed" their
display).
Temperature control of water
Here you determine whether the machine will
monitor and adjust the water temperature during fil-
ling, by opening and closing the cold and hot water
valves.
If you answer Yes (Y):
This function will be activated.
If you answer No (N):
Temperature control not activated. Both the hot
and the cold water valves will be opened until
the machine has filled to the correct level.
101
1
720 SEC
70 MIN
48 RPM
SELECT