Electrolux W4400H Service Manual page 123

DEFAULT MEDIUM EXTRACT TIME
DEFAULT HIGH EXTRACT TIME
DEFAULT DRAIN TIME
DEFAULT DISTR. TIME
DO UNBALANCE MEASUREMENT
DRAIN OPEN DELAY
START EXTRACT TIME
ROLLOUT TIME
PAY PER WASH ALARM
LOCK TEST DELAY
DRAIN TIME WHEN OVERFILL
OIL LUBRICATION HOURS
PULSE TIME OIL LUBR. SEC
AMOUNT OF I/O MODULES (1-)
1
4
7
Programme unit
00:15
00:20
00:40
00:0
Y
0:1
00:0
00:01
0
0:10
0:05
100
0:01

Use the numeric keys to
2 3
enter the value.
5 6
8 9
If you make a mistake while
entering digits:
0
Press ERASE.
When you have finished:
Press .
Rollout time
Here you determine whether you want a time delay
after each extraction before the machine starts to
fill with water, to give the motor time to slow down.
This function is useful if the motor is not a frequen-
cy-controlled one.
Another function, intended primarily for frequency-
controlled motors (which continuously report
motor speed to the PCU), is called "MAX. SPEED
DURING FILLING" (SETTINGS 2, described later
in this section). This function allows you to specify
a speed which the motor must drop below before
water filling can begin.
If these functions are combined, you must ensure
that the "rollout time" will have ended before water
filling is allowed to begin, regardless of whether the
drum speed has, prior to that, dropped below the
speed specified in "MAX. SPEED DURING FIL-
LING".
Rollout time
Speed
Extraction
12
Time
Water
filling
Rinse