Electrolux W4400H Service Manual page 156

156
X95: Input from rotation sensor on motor
10
shaft
11
When the motor is operating, a pulse train is
applied on the input.
Input Function
Pin 1: DC 4-10 V feed
Pin 2: 0V
Pin : DC 4-10 V pulse input
Frequency > 0.4 Hz: drum is rotating
Frequency < 0.4 Hz: drum is not rotating
X96: Output to door lock
Locks the door lock when the following condi-
tions are met:
• DC 200-240 V on input X92 (programme unit
request door locking)
• DC 0 V on input X9 (no water in drum)
• DC +5 V on input X94 (motor not activated)
• <0.4 Hz on input X95 (drum not rotating)
• No error code present
Unlocks the door lock when the following condi-
tions are met:
• DC 0 V on input X92 (programme unit request
door opening)
• DC 0 V on input X9 (no water in drum)
• DC +5 V on input X94 (motor not activated)
• <0.4 Hz on input X95 (drum not rotating)
• No error code present
Voltage
DC 17-1 V, + on pin 1, - on pin 2
DC 17-1 V, - on pin 1, + on pin 2
Door and door lock
Function
Unlock the door
Locks the door
10
Door lock control A1
Rotation sensor
B
X95
1
2

Unlocks +
Locks
Door lock A41
11
X95
X96
-
- +
1
2
X96
Y80
5194
5184