Tilt function
Installation
Remove the machine's side panels, lower front
1
panel and rear covers.
For machines with tilt both forwards and back-
2
wards:
Insert the two cylinder units from the side of the
machine underneath the machine frame.
If there is vinyl floor-covering on the floor:
To protect the floor from wear, a sheet of stain-
less steel should be laid beneath each cylinder
unit.
For machines with forward tilt only:
3
Insert the cylinder unit from the side of the
machine underneath the rear section of the
machine frame.
Tilt function (Optional equipment)
1
2
3
167
449
Cylinder units
6044
Cylinder units
6045