Anchoring To Floor; Assembly - Grizzly G0801 Owner's Manual

Anchoring to Floor

Number of Mounting Holes ............................ 4
Diameter of Mounting Hardware .................
Anchoring machinery to the floor prevents tipping
or shifting and reduces vibration that may occur
during operation, resulting in a machine that runs
slightly quieter and feels more solid.
If the machine will be installed in a commercial or
workplace setting, or if it is permanently connect-
ed (hardwired) to the power supply, local codes
may require that it be anchored to the floor.
If not required by any local codes, fastening the
machine to the floor is an optional step. If you
choose not to do this with your machine, we rec-
ommend placing it on machine mounts, as these
provide an easy method for leveling and they have
vibration-absorbing pads.
Anchoring to Concrete Floors
Lag shield anchors with lag screws (see below)
are a popular way to anchor machinery to a con-
crete floor, because the anchors sit flush with the
floor surface, making it easy to unbolt and move
the machine later, if needed. However, anytime
local codes apply, you MUST follow the anchoring
methodology specified by the code.
Machine Base
Concrete
Figure 17. Popular method for anchoring
machinery to a concrete floor.
-22-
⁄ "
3
8
Lag Screw
Flat Washer
Lag Shield Anchor
Drilled Hole

Assembly

The Model G0801/G0802 comes fully assembled
except for the X-, Y-, and Z-axis handwheel
handles.
To fully assemble the machine, thread the includ-
ed handwheel handles into the X-, Y-, and Z-axis
handwheels (see Figure 18).
Figure 18. Location of handwheel handle
installation to complete assembly.
Model G0801/G0802 (Mfd. Since 09/15)