Livingston Extensions; Portmaster Serial Interfaces - Lucent Technologies PortMaster 4 Configuration Manual

Table 3-1
OID
...307.3.2.1.1.1.5
...307.3.2.1.1.1.6
...307.3.2.1.1.1.7

Livingston Extensions

This section lists the following tables from the Livingston Extensions section of the MIB:
• "PortMaster Serial Interfaces" on page 3-5
• "PortMaster T1 and E1 Interfaces" on page 3-7
• "PortMaster Internal Modem Table" on page 3-8
• "PortMaster Billing and Accounting Information Table" on page 3-9
• "PortMaster Call Event Status Table" on page 3-10
• "PortMaster Board Call Summary Table" on page 3-11
• "PortMaster Line Call Summary Table" on page 3-11

PortMaster Serial Interfaces

The PortMaster Serial Interfaces table (Table 3-2) in the Livingston Extensions section of
the MIB lists all serial interface entries.
Table 3-2
Object
livingstonSerialIndex
livingstonSerialPortName
livingstonSerialPhysType
livingstonSerialUser
livingstonSerialSessionId
livingstonSerialType
livingstonSerialDirection
livingstonSerialPortStatus
livingstonSerialStarted
Configuring SNMP
Partial View of the Livingston Serial Interfaces Table (Continued)
PortMaster Serial Interfaces MIB Table
Interface (C0 and C1)
SessionId
Type
Direction
Definition
Unique value for each serial interface.
Text string containing the name of the serial
interface (for example, C0, W1, and so on).
Type of physical serial interface, distinguished
according to the physical or link protocol(s)
currently being used on the interface.
Name of the active user. Blank if not active.
Unique session identifier that matches the
RADIUS session ID.
Active type of service being provided by the
serial interface.
Direction in which the active session was
initiated.
Status of the serial interface.
Amount of time this session has been active.
Livingston Extensions
3-5