Configuring Global Settings - Lucent Technologies PortMaster 4 Configuration Manual

Configuring Global Settings

This chapter describes how to configure settings that the PortMaster 4 uses across all its
ports and interfaces.
This chapter discusses the following topics:
• "Setting the View" on page 2-2
• "Configuring Name Resolution" on page 2-2
• "Setting the Telnet Port" on page 2-3
• "Setting Management Application Connections" on page 2-4
• "Setting System Logging" on page 2-4
• "Setting Administrative Logins to Serial Ports" on page 2-6
• "Setting the Chassis" on page 2-6
• "Configuring Local IP Addresses" on page 2-6
• "Configuring an IP Address Pool" on page 2-8
• "Setting the Reported IP Address" on page 2-9
• "Configuring Named IP Pools" on page 2-9
• "Setting the Dynamic Host Control Protocol (DHCP) Server" on page 2-13
• "Displaying the Routing Table" on page 2-16
• "Setting Static Routes" on page 2-17
• "Setting Authentication for Dial-In Users" on page 2-21
• "Setting Call-Check Authentication" on page 2-21
• "Setting the ISDN Switch" on page 2-22
• "PortMaster Security Management" on page 2-22
See the PortMaster 4 Command Line Reference for more detailed command descriptions and
instructions.
You can also configure the PortMaster 4 using the PMVision application for Microsoft
Windows, UNIX, and other platforms supporting the Java Virtual Machine (JVM).
PMVision replaces the PMconsole interface to ComOS.
2
2-1