Configuring The Quad T1 Boards - Lucent Technologies PortMaster 4 Configuration Manual

PortMaster 4 Quick Setup Guide for ISDN PRI
9. Set the RADIUS password.
Command> set secret String
10. Set the IP address of the RADIUS accounting server.
Command> set accounting 192.168.120.10
11. Use RADIUS-provided netmasks.
Command> set user-netmask on
12. Set the ChoiceNet server address.
Command> set choicenet 192.168.120.10
13. Set the ChoiceNet password.
Command> set choicenet-secret String
14. Save the configuration to nonvolatile memory.
Command> save all

Configuring the Quad T1 Boards

To configure a Quad T1 board, you set the view to the slot where the Quad T1 board is
installed. Substitute your own information for variables.
1. Set the slot to 0.
Command> set view 0
2. Set the base address of an address pool to slot 0.
Command 0> set assigned_address 192.168.0.1
3. Set the number of IP addresses in the pool.
Command 0> set pool 92
4. Set the switch type for slot 0.
Command 0> set isdn-switch dms-100
5. Set Line0 to PRI, slot 0.
Command 0> set line0 isdn
6. Set Line1 to PRI, slot 0.
Command 0> set line1 isdn
7. Set Line2 to PRI, slot 0.
Command 0> set line2 isdn
8. Set Line3 to PRI, slot 0.
Command 0> set line3 isdn
10-4 PortMaster 4 Configuration Guide