View Lldp Neighbors Information - NETGEAR GC728X User Manual

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports

View LLDP Neighbors Information

You can view the data that a specified interface received from other LLDP-enabled systems.

To view LLDP information received from a neighbor device:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System > Advanced > LLDP > Neighbor Information.
The Neighbor Information page displays.
If no information was received from a neighbor device, or if the link partner is not
LLDP-enabled, no information displays.
The following table describes the information that displays for all LLDP neighbors that
were discovered.
Field
MSAP Entry
Local Port
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
System Name
6. To view additional information about the remote device, click the link in the MSAP Entry
column.
Description
The Media Service Access Point (MSAP) entry number for the remote
device.
The interface on the local system that received LLDP information from a
remote system.
The type of data displayed in the Chassis ID field on the remote system.
The remote 802 LAN device's chassis.
The type of data displayed in the remote system's Port ID field.
The physical address of the port on the remote system from which the data
was sent.
The system name associated with the remote device. If the field is blank, the
name might not be configured on the remote system.
Configure System Information
91
Access the Switch on page 13.