Configure Vlan Acl Bindings - NETGEAR GC728X User Manual

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
6. To delete an IP ACL-to-interface binding, do the following:
a. Select the check box next to the interface.
b. Click the Delete button.
The binding is removed.
The following table describes the information displayed in the IP ACL Binding Table.
Table 81. IP ACL Binding Table
Field
Interface
Direction
ACL Type
ACL ID/Name
Sequence Number

Configure VLAN ACL Bindings

You can associate an ACL with a VLAN. When an ACL is associated with a VLAN, it is
applied to all interfaces that are members of the VLAN.

To configure VLAN ACL bindings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Security > ACL> Advanced > VLAN Binding Configuration.
The VLAN Binding Configuration page displays.
Description
The interface.
The selected packet filtering direction for the ACL.
The type of ACL assigned to the selected interface and direction.
The ACL number (for an IP ACL) or ACL name (for a named IP ACL or
IPv6 ACL) identifying the ACL assigned to the selected interface and
direction.
The sequence number signifying the order of the specified ACL relative
to other ACLs assigned to the selected interface and direction.
Manage Device Security
340
Access the Switch on page 13.