NETGEAR GC728X User Manual page 47

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
View SNTP Global Status
When you select the SNTP option as the clock source, the SNTP global status is displayed
below the SNTP Global Configuration section of the page. The SNTP Global Status table
displays information about the system's SNTP client.

To view SNTP global status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System > Management > Time > Time Configuration.
The Time Configuration page displays.
If the clock source is SNTP, the SNTP Global Status section displays below the SNTP
Global Configuration section.
6. Click the Refresh button to update the page with the latest information about the switch.
The following table displays the nonconfigurable SNTP Global Status information.
Table 10. SNTP Global Status information
Field
Version
Supported mode
Last Update Time
Last Attempt Time
Description
The SNTP version that the client supports.
The SNTP modes that the client supports. Multiple modes can be supported by
a client.
The local date and time (UTC) that the SNTP client last updated the system
clock.
The local date and time (UTC) of the last SNTP request or receipt of an
unsolicited message.
Configure System Information
47
Access the Switch on page 13.