NETGEAR GC728X User Manual page 55

Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System > Management > Time > DayLight Saving Configuration.
The DayLight Saving (DST) Configuration page displays.
6. To refresh the page, click the Refresh button.
The following table displays the nonconfigurable daylight saving status information.
Table 12. Daylight Saving (DST) Status information
Field
Daylight Saving (DST)
Begins At
Ends At
Offset (in Minutes)
Zone
Daylight Saving (DST) in Effect
Description
The Daylight Saving value, which is one of the following:
• Disable
• Recurring
• Recurring EU
• Recurring USA
• Non Recurring
The start date of daylight saving time. This field is not displayed when
daylight saving time is disabled.
The end date of daylight saving time. This field is not displayed when
daylight saving time is disabled.
The offset value in minutes.This field is not displayed when daylight
saving time is disabled.
The zone acronym. This field is not displayed when daylight saving
time is disabled.
Indicates whether daylight saving time is in effect.
Configure System Information
55
Access the Switch on page 13.