NETGEAR GC728X User Manual page 154
Insight managed 28-port gigabit ethernet smart cloud switch with 2 sfp 1g & 2 sfp+ 10g fiber ports
Hide thumbs
Also See for GC728X:
- Hardware installation manual (31 pages) ,
- Installation manual (2 pages) ,
- Hardware installation manual (40 pages)
Table of Contents
Advertisement
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
Table 42. IGMP Snooping Configuration information (continued)
Field
VLAN IDs Enabled For IGMP
Snooping
VLAN IDs Enabled For IGMP
Snooping Querier
Configure IGMP Snooping for Interfaces
To configure IGMP snooping for interfaces:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5.
Select Switching> Multicast > IGMP Snooping > IGMP Snooping Interface
Configuration.
The IGMP Snooping Interface Configuration page displays.
6.
To display information for all ports and LAGs, click the All link.
7.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the port, or type
the port number in the Go To Interface field and click the Go button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
8.
From the Admin Mode menu, select Disable or Enable.
This specifies the interface mode for the selected interface for IGMP snooping for the
switch. The default is Disable.
9.
In the Host Timeout field, specify the time that the switch must wait for a report for a
particular group on a particular interface before it deletes that interface from the group.
Description
The IDs of the VLANs that are enabled for IGMP snooping.
The IDs of the VLANs that are enabled for IGMP snooping querier.
Configure Switching
154
Access the Switch
on page 13.
Hide quick links:
Advertisement
Table of Contents
