Inspection Points For Sealing; Park Trailer - Jayco COVE 2002 Owner's Manual

COMPONENT
Entrance Door Inspect and seal corners of the door frame
threshold one time each year. See Fig. 7-12.
Clearance Lights Inspect all exterior lights to make sure they do
not have moisture trapped inside. The "weep"
holes at the bottom of the lights must be kept
open to allow moisture to escape from the light
fixture.
All sealants used in construction can deteriorate
Sealants
from U.V. exposure, air pollution, freezing
temperatures and other exposure to weather
elements.
Tape sealants used around doors, windows,
and extrusions are subject to dry out conditions
by sunlight and will allow water seepage when
they deteriorate. Verify that the 45° angle on
the corners of the slideout are checked
regularly.
Inspect sealants at least two times each year and
look for voids and/or dried out, cracking or
peeling conditions. See Fig. 7-12. Inspect all
locations as indicated in Figures 7-12. Reseal as
necessary or at least one time each year. Contact
your dealer for the appropriate sealant to use.

INSPECTION POINTS FOR SEALING

Park Trailer

Fig. 7-12
1. Moldings
2. TV Antenna
3. Vents
4. Slideout Trim/
Moldings
5. Windows
6. Exterior Attachments
7. Clearance & Tail
Lights
Maintenance/Storage
MAINTENANCE AVOID
Using poor quality sealing
material.
Failure to reseal sealant and
putty tape.
Using poor quality sealing
material.
Failure to reseal sealant and
putty tape.
99