Inspection Points For Sealing - Jayco Eagle 264 BH Owner's Manual

COMPONENT
Sealants
Entrance Door
Roofs
MAINTENANCE
All sealants used in construction
can deteriorate from U.V.
exposure, air polution, freezing
temperatures and other exposure
to weather elements.
Tape sealants used around
doors, windows, and extrusions
are subject to dry out conditions
by sunlight and will allow water
seepage when they deteriorate.
Inspect sealants at least two
times each year and look for
voids and/or dried out cracking
or peeling conditions. See
Fig. 7-4 or 7-5. Reseal as
necessary or at least one time
each year. Contact your dealer
for the appropriate sealant to
use.
Inspect and seal corners of the
door frame threshold one time
each year. See Fig. 7-4 or 7-5.
All roofs require maintenance.
At least two times each year,
inspect all seams: front, rear,
around all vents, and along all
moldings for voids, lifting, peel-
ing or cracking. Reseal as nec-
essary or at least pne time each
year. If you notice any deterio-
ration in the seal, scrape off any
cracked or loose sealant and
then reseal the area. See Fig. 7-4
or 7-5.
88
AVOID
Using poor quality sealing ma-
terial.
Failure to reseal sealant and
putty tape.
Not resealing once per year.