Monitor Panel; Operation - Jayco COVE 2002 Owner's Manual

MONITOR PANEL

The monitor panel (Fig. 5-18) will provide useful
information on the capacities of the water tanks. Follow the
instructions below regarding operation.
The panel operates on 12-volt DC power supplied by the
converter or battery. Sensors are installed into the tanks and
a resistor assembly relays a message through wires to the
display board on the panel. No power is drawn from the
battery unless a switch is pushed or turned on.

Operation

Four spring loaded push button switches are located on the
panel. Press only one button at a time, as one set of lights
serves all functions. As you push any button, one or more
lights will come on, indicating the water level of that tank. If
your park trailer does not have the laundry and/or the fresh
water tank options, when these buttons are pushed, the panel
will show empty tanks.
Fuses for the monitor panel operation are in 12-volt
distribution center fuse block
Appliances
Fig. 5-18
67