Chapter 3 Use Of Your Park Trailer; Setting Up Your Park Trailer; Getting Connected - Jayco COVE 2002 Owner's Manual

In this chapter you will find helpful information to assist you in preparing and setting up your park
trailer.

Setting Up Your Park Trailer

Your dealer will be a reliable advocate in getting your park trailer set up for use. Your park trailer
has been designed with an open frame and depending on your preference, the park trailer may be set
up with stabilizer jacks (option), or by blocking the trailer up. We recommend that you consult with
your dealer about the options available to you for your park trailer sight.
#
CAUTION: Do not use the stabilizer jacks to level the trailer. It is important to remember
that stabilizer jacks are to be used only for support while occupying and moving around in
your park trailer. They are not designed to bear the weight of the park trailer.

Getting Connected

Upon completing the setup of your park trailer, you are now ready to make attachments to various
facilities as listed but not limited to:
• Fresh water supply.
• Waste water connection(s).
• 120-volt power cord electrical hookup.
• Turn on LP gas tanks and light pilot lights for any appliances. Remember there may be air in
your LP gas lines. Be sure to bleed them before planned usage.
• Your park trailer is equipped with a rear LP gas hookup for an option of a more
permanent LP connection. Consult with your park trailer dealer or an LP Gas dealer for
assistance in making a permanent connection. The drawing below shows the LP gas line
location.
Rear LP
Gas Hookup
Water
Stove
Heater
Furnace
You may have additional accessories and options, such as an awning on the door side to set up.
Separate instructions are provided by the manufacturer of the component.
Use Of Your Park Trailer
Chapter 3
USE OF YOUR PARK TRAILER
Outside
Refrigerator
Stove
Fig. 3-1
LP Bottle
Hookup
7