Slideout Operation - Jayco COVE 2002 Owner's Manual

Slideout Operation

The slideout room is designed for additional floor space and comfort. Mechanical components are
gear driven and produced by Power Gear Company. Read ALL instructions applying to the slideout
before operation to become familiar with the system.
I
WARNING:
• Ensure that the park trailer is level before operating the slideout room.
• Ensure there are no people or obstructions blocking the path of the room when it is
moving.
• Keep away from the slide rails when the room is in motion.
• The gear assembly may pinch or catch on loose clothing causing personal injury.
• Always install transit bars for storage and transportation.
• Ensure the slideout is in the closed position prior to hooking the trailer to the tow
vehicle.
#
CAUTION: Do not place excessive weight in the slideout room.
#
CAUTION: After the slideout is extended, verify that the corners of the black rubber seal are
set up correctly. The corners of this seal are cut at a 45° angle. The top of the seal must
overlap the side of the seal to avoid the possibility of water damage. (Fig. 3-2)
8
Failure to follow these instructions
could result in serious injury or death.
Fig. 3-2
Cove Owner's Manual