S Ave C Onfiguration - Planet Networking & Communication WGSW-24010 User Manual

3.4 Save Configuration
The configurations you modified in console will
startup configuration.
1. Enter "exit" to exit the configuration mode. The prompt "console(config)#" will return to "console#".
2. Enter "copy running-config startup-config" on "console#" prompt to save the changes. As show in Figure 3-10.
3. You can also make a copy of the running configuration to a backup configuration. As show in Figure 3-11.
4. To ensure the configuration is saved and copied correctly, on "console#" prompt, enter "show running-config" to
check the running configure, enter "show startup-config" to check the startup configuration, and "show
backup-config" to check the backup configuration. Figure 3-12 show an example.
NOT
Figure 3-10 Copy running-config to startup-config
Figure 3-11 Copy running-configure to backup-configure.
Figure 3-12 Show running configuration
save to next startup until you copy the running configuration to the
10