Table of Contents
Advertisement
The page includes the following fields:
• Bridge Multicast Filtering -- Enables or disables bridge Multicast filtering. Disabled is the default value. IGMP
Snooping can be enabled only if Bridge Multicast Filtering is enabled.
• IGMP Snooping Status -- Enables or disables IGMP Snooping on the device. Disabled is the default value.
Bridge Multicast Group
The Bridge Multicast Group page displays the ports and LAGs attached to the Multicast service group in the
Ports and LAGs tables. The Port and LAG tables also reflect the manner in which the port or LAGs joined the
Multicast group. Ports can be added either to existing groups or to new Multicast service groups. The Bridge
Multicast Group page permits new Multicast service groups to be created. The Bridge Multicast Group page
also assigns ports to a specific Multicast service address group.
To open Bridge Multicast Group screen perform the folling:
1.
Click Switch -> Multicast Support -> Bridge Multicast Group
2.
The Bridge Multicast Group screen is displayed as in Figure 3-70
Figure 3-69 Multicast Global Parameters
80
Advertisement
Table of Contents
