Planet Networking & Communication WGSW-24010 User Manual page 86

The page includes the following fields:
• VLAN ID -- Identifies a VLAN and contains information about the Multicast group address.
• Bridge Multicast Address -- Identifies the Multicast group MAC address/IP address.
• Remove -- When selected, removes a Bridge Multicast address.
• Ports -- Port that can be added to a Multicast service.
• LAGs -- LAGs that can be added to a Multicast service.
The following table contains the IGMP port and LAG members management settings:
Port Control Definition
D The port/LAG has joined the Multicast group dynamically in the Current Row.
S Attaches the port to the Multicast group as static member in the Static Row.The port/LAG has joined
the Multicast group statically in the Current Row.
F Forbidden.
Blank The port is not attached to a Multicast group.
Adding Bridge Multicast Addresses
1. Click Add. The Add Bridge Multicast Group page opens.
2. Define the VLAN ID and New Bridge Multicast Address fields.
3. Toggle a port to S to join the port to the selected Multicast group.
4. Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
5. Click Apply Changes.
The bridge Multicast address is assigned to the Multicast group, and the device is updated.
Defining Ports to Receive Multicast Service
1. Define the VLAN ID and the Bridge Multicast Address fields.
2. Toggle a port to S to join the port to the selected Multicast group.
Figure 3-70 Bridge Multicast Group screen
81