C Hange U Sername And P Assword - Planet Networking & Communication WGSW-24010 User Manual

3.3 Change Username and Password
For security reason, we strongly suggest that you change user name and password immediately.
1. On "console#" prompt, enter "configure" to enter the configuration mode. The prompt "console#" then
become"console(config)#".
2. On "console(config)#" prompt, enter "no username admin" to delete the default user. As show in Figure 3-8.
3. Enter "username AAAA password BBBB level N" to add a new username/password. Where AAAA is the new
username, BBBB is the new password and N is the access level, upper case and lower case is sensitive for username
and password. For example, if you want to add "supervisor" as a new username and "99888899" as the relative
password and with full management privilege, the command will be "username supervisor password 99888899
level 15". As show in Figure 3-9.
Figure 3-7 Show IP address
Figure 3-8 Delete default user
Figure 3-9 Add new username/password
9