Printing on Fabric
Fixing Ink
Use the optional finisher to fix ink to the fabric.
When using the multi tray, remove the fabric from the cassette,
and then fix the ink to the fabric.
•
Do not use the optional finisher while using the multi tray and the
sleeve attachment because using it may cause a failure. Remove the
fabric from the multi tray and the sleeve attachment, and then fix the
ink.
•
Do not heat the multi tray table or the fabric placed on the multi tray
table with the optional finisher. Doing so may deform or damage the
table.
•
As the A4 standard tray and A5 tray becomes hot when continuously
used on the optional finisher, give an interval of five minutes or long-
er to set them after they are pulled out.
2
•
For reference, in the case of a commercially available heat press, ink
was fixed at 330°F (approx. 165°C) in 90 seconds.
•
When using the finisher, you can carry out heat press processing for
the fabric loaded in the A4 standard tray or A5 tray.
30