Ricoh Ri 100 User Manual page 15

Tuck the edges of the fab-
ric under the table.
• Smooth out the fabric so that
no wrinkles or slack remain
on the print surface.
• Tuck the fabric so that no
wrinkles or folds remain in
the area at the edges of the
table.
Make sure that no wrinkles or slack remain on the
print surface, and then close the cover. As you close
the cover, smooth away any wrinkles with your hand.
• Make sure that the fabric fits on the cassette.
• When using the optional finisher, smooth wrinkles and flat-
ten fibers after loading the fabric in the cassette.
• After closing the cover, make sure that the fabric is loaded
so its surface is parallel to the cover.
DSA217
DSA370
2
DSA014
DSA218
15