Ricoh Ri 100 User Manual page 22

Load the sleeve attach-
ment on the multi tray.
• Load it at the back side of
the table, as shown in the
figure. Set the sleeve attach-
ment tightly to the back of
the multi tray.
• Detach the frame for press-
ing sleeves in advance.
L o a d t h e f a b r i c o n t h e
sleeve attachment.
• The image will be printed in
the direction from the front
2
side to the back side of the
cassette.
Load the frame for press-
ing sleeves on the sleeve
attachment, and then tuck
the edges of the fabric un-
der the table.
• Load it so that no wrinkles
or folds remain in the area
at the edges of the frame for
pressing sleeves.
• Make sure to push down the frame so that it is placed be-
low the surface of the fabric.
22
DSA354
DSA355
DSA356