Ricoh Ri 100 User Manual page 26

After the cassette returns to the front side of the ma-
chine, detach the cassette.
• If the [Start] key is still lit, the printing has not been complet-
ed. Press the [Start] key again without detaching or remov-
ing the cassette from the machine. The printing will resume.
• When using the A4 standard tray or A5 tray, insert the pro-
tection cover horizontally as illustrated in the figure, and
then remove it with the A4 standard tray or A5 tray. This
prevents you from touching the print surface. Make sure the
protection cover is correctly positioned horizontally.
2
Exit the Design Software.
• By clicking [Print One More], you can configure the layout
settings again for the image loaded.
• Clicking [Back to TOP] discards the loaded image and re-
turns you to the top screen of the Design Software.
26
DSB024
DSA064