Move the detection lever in the direction shown in the
figure.
Adjust the height of the multi tray table.
• Turn the four knobs counterclockwise on the underside of
the multi tray to release the lock, and then adjust the height
2
of the table. After adjusting it, turn the four knobs clockwise
to put the lock.
• When loading a thin fabric (up to 16 mm (0.6 inches) in
thickness), adjust to the top.
• When loading a thick fabric (16 to 32 mm (about 0.6 to 1.3
inches) thick), adjust to the bottom.
18
DSA349
DSA353
DSA350