Ricoh Ri 100 User Manual page 38

If the print head is still clogged
Repeat Steps 1–5. After this procedure is performed multiple
times and you wait for a while, normal printing may become
possible.
If the print head is still clogged even after the proce-
dure above is performed
Repeat Steps 1–5. However, perform a head flushing in Step 2
instead of performing a head cleaning.
See page 48 "Head-flushing".
Clean the maintenance unit and print head.
For details, see "Cleaning the Maintenance Unit" or "Cleaning
the Print Head Nozzles", Maintenance Guide.
When the error still occurs even after you perform the treatments de-
scribed above, consult your dealer or service representative.
4
38