Taws-A Voice No Callout Option Configuration; Figure 3-22, Taws-A No Voice Callout Installation Configuration - Garmin G1000 System Maintenance Manual

3.11

TAWS-A Voice No Callout Option Configuration

This section applies only to installations with the TAWS-A option. If TAWS-A voice callouts (400, 300, 200, 100)
are not desired, follow the procedures outlined in this section to load the necessary configuration files to disable
TAWS-A voice callouts.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the "SYSTEM
UPLOAD" page using the small FMS knob on PFD1.
2. Activate cursor and rotate the small FMS knob to display drop down menu. Highlight King Air - Options
and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight "TAWS-A No Voice Callout Installation Option". Press ENT key
on PFD1.
4. Verify the "TAWS-A No Voice Callout Installation Option" is displayed in the "Item" window. Press
"LOAD".

Figure 3-22, TAWS-A No Voice Callout Installation Configuration

5. Monitor load progress. Verify software load completes without errors as indicated by the following:
• Green "PASS" in Configuration column for AIRFRAME.
• "Upload Complete.............COMPLETE" in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
190-00716-01
Page 3-25
Revision 1