Gsr 56 Satellite Reciever Option Configuration; Pots Handset Configuration; Figure 3-36, Gsr 56 Configuration - Garmin G1000 System Maintenance Manual

3.24

GSR 56 Satellite Reciever Option Configuration

Follow this procedure to enable the optional GSR 56 satellite receiver function.
The GDL 59 Wi-Fi data link option must be loaded per Section 3.23 prior to
loading the GSR 56 option.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the "SYSTEM
UPLOAD" page using the small FMS knob on PFD1.
2. Activate cursor and rotate the small FMS knob to display drop down menu. Highlight King Air - Options
and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight "GSR 56". Press ENT key on PFD1.
4. Verify "GSR 56" is displayed in the "Item" window. Press "LOAD".
5. Monitor load progress. Verify software load completes without errors as indicated by the following:
• Green "PASS" in Configuration column for AIRFRAME, GDL 59, and ECTM/Exceedance Reports.
• "Upload Complete.............COMPLETE" in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.
3.25

POTS Handset Configuration

Follow this procedure to enable a POTS handset if installed. Note that the GDL 59 wi-fi data link option
must be loaded per Section 3.23 prior to loading the POTS handset configuration.
1. Power up the PFD1 in configuration mode.
2. On the PFD1, select GDL page group using the large FMS knob.
3. Using the small FMS knob select the GDL 59 Configuration page.
4. Activate the cursor. Use the large FMS knob to select POTS CONNECTED in the PHONE
SETTINGS field.
5. Use the small FMS knob to select YES and press the ENT key.
6. After GDL 59 is configured, press the ENT key.
Page 3-38
Revision 1
NOTE

Figure 3-36, GSR 56 Configuration

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
190-00716-01