Gtx 33/33D Configuration; Figure 3-33, Gtx33/33D Configuration - Garmin G1000 System Maintenance Manual

3.21

GTX 33/33D Configuration

Do not perform this step if the TCAS II System Option was loaded per section 3.16. Follow the procedures outlined
in this section to load the necessary software and configuration files to enable the GTX33/33D transponders.
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the "System Upload"
page using the PFD1 small FMS knob.
2. Activate cursor and rotate the small FMS knob to display drop down menu. Highlight King Air - Options
and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight "GTX 33ES". Press ENT key on PFD1.
4. Verify "GTX 33ES" is displayed in the "Item" window. Press "LOAD".
5. Monitor load progress. Verify software load completes without errors as indicated by the following:
• Green "PASS" in Configuration column for GIA1, GIA 2, GTX 1 and GTX 2.
• Green "PASS" in Software column for GTX 1 and GTX 2.
• "Upload Complete.............COMPLETE" in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.
8. On the MFD, verify that the GTX software part number and version matches the information in G1000/GFC
700 AFCS, King Air 300/B300, 005-00629-02, General Arrangement drawing.
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
190-00716-01

Figure 3-33, GTX33/33D Configuration

Page 3-35
Revision 1