Taws-A Voice No Callout Option Configuration - Garmin G1000 System Maintenance Manual

3.24

TAWS-A Voice No Callout Option Configuration

This section applies only to installations with the TAWS-A option. If TAWS-A voice callouts (400, 300,
200, 100) are not desired, follow the procedures outlined in this section to load the necessary
configuration files to disable TAWS-A voice callouts. Coordinate the TAWS-A Voice No Callout Option
configuration with Section 7.16 "TAWS Functional Check".
1. With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the
"SYSTEM UPLOAD" page using the small FMS knob on PFD1.
2. Activate cursor and rotate the small FMS knob to display the drop down menu. Rotate the small
FMS knob to highlight "King Air – Airframe Options" and press ENT key on PFD1.
3. Rotate the small FMS knob to highlight "King Air - TAWS-A No Voice Callout Installation
Option". Press ENT key on PFD1.
4. Verify the "King Air - TAWS-A No Voice Callout Installation Option" is displayed in the
"Item" window. Press "LOAD" softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration column for each item loaded.
•
"Upload Complete.............COMPLETE" in the summary box.
6. Press ENT key on PFD1 to acknowledge upload complete.
7. Deactivate cursor.
Page 3-38
Revision 4
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
190-00716-01