Panasonic KX-WP1050 Operating Instructions Manual page 99

Temporary Confidential
3
Select the profile you wish to modify from the pull-down menu under the Select Profile
heading, then click [Edit].
L To delete a profile, select the desired profile from the pull-down menu and click
[Delete].
4
Configure the connection mode of the profile you select in step 3, then click [Next>].
L See "Configuring the Internet connection settings" on page 36 for instructions.
5
Confirm the settings you are about to save, then click [Save].
6
Click [Restart].
L The base unit restarts in the connection mode that is registered as HOTEL or HOME
mode profile you have just created (The position of the Mode selector switch
determines the connection mode). However, editing AP (Bridge) mode profile while
the Mode selector is switched to "HOTEL" does not restart the base unit in AP
(Bridge) mode profile.
Note:
L In step 3, if you delete the profile you are currently using for HOTEL or HOME mode, the
profile will be reset to the default setting (DHCP).
For assistance, please visit http://www.panasonic.com/phonehelp
Base Unit Settings
99