While You Are At Home - Panasonic KX-WP1050 Operating Instructions Manual

Temporary Confidential
4
Connect the included AC adaptor cord to the power port on the base unit and an AC
outlet.
L When the base unit turns on (The WAN indicator lights in green or amber), the
installation is complete.
Note:
L In step 2, you can connect the base unit to a wireless bridge device in a hotel room if
available. Ask the hotel front desk for details.

While you are at home

The base unit has 2 modes of operation while used at home: AP (Bridge) mode and
Router mode.
AP (Bridge) mode:
Designed for the case when you have a router or modem (DSL or cable) with a built-in
router.
L Refer to the instructions on page 24.
Router mode:
Designed for the case when you have a standard DSL or cable modem only.
L Refer to the instructions on page 25.
Note:
L If your modem has more than one port, then you have a modem with a built-in router.
L If you have more than one computer connected to the Internet, then you have a router.
L If you do not know which type your modem is, ask your Internet service provider.
For assistance, please visit http://www.panasonic.com/phonehelp
Getting Started
23