Panasonic KX-WP1050 Operating Instructions Manual page 25

Temporary Confidential
4
Connect the existing Ethernet cable to the "LAN" port on the base unit and the Ethernet
(LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged
the router from in step 2).
5
Connect the included AC adaptor cord to the power port on the base unit and an AC
outlet.
L When the base unit turns on (The WAN indicator lights in green or amber), the
installation is complete.
Router mode - With a MODEM only
If you install the base unit with a modem only, the base unit operates in Router mode. In
Router mode, the base unit assigns IP addresses to wireless devices as a DHCP server.
It also protects the wireless devices from directly exposing to the LAN. For your Internet
connection type, select [DHCP], [Static] or [PPPoE] in Initialization Wizard (page 27).
AC cord
To AC outlet
(120 V AC, 60 Hz)
1
Switch the Mode selector to "HOME".
2
Turn off your computer properly. Unplug your cable or DSL modem's power cord and
leave the modem turned off for at least 10 minutes to clear its memory. Unplug any
For assistance, please visit http://www.panasonic.com/phonehelp
Mode selector
Base unit
6
AC adaptor
1
4
To LAN port
Ethernet cable
(not included)
3
To WAN port
Ethernet cable
(included)
Getting Started
WAN indicator
Computer
2
Internet
2, 5
Cable or DSL modem
25