Panasonic KX-WP1050 Operating Instructions Manual page 150
Wi-fi phone for skype
executive travel set
Hide thumbs
Also See for KX-WP1050:
- Operating instructions manual (236 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Base Unit Settings
Temporary Confidential
6
Enter the IP address.
L The IP address must be within the range of 192.168.0.1-192.168.0.254 except for
192.168.0.242 (the default IP address of the base unit on the LAN interface).
7
For Subnet mask, enter 255.255.255.0.
8
Click [OK].
9
Click [OK], then close the Network Connection window.
10
On the Web browser, enter http://192.168.0.242
11
Click [Advanced Setup] on Top Menu.
12
Click the [Maintenance] tab, and then click [Update Firmware].
13
Check for the latest version by clicking the support information URL.
14
If the version is updated, download the updated firmware to your computer.
15
Specify the file name.
You can also click [Browse...] to select the desired file name from the list.
16
Click [Update].
L The base unit automatically restarts after the firmware is updated.
Important:
L Do not interrupt the firmware updating process by cutting the power supply until the
progress indicator reaches 100% and the base unit restarts itself.
17
Confirm that WAN Indicator is not flashing in amber, then set your computer setting
back to the previous condition.
150
For assistance, please visit http://www.panasonic.com/phonehelp
Advertisement
Table of Contents
