Panasonic KX-WP1050 Operating Instructions Manual page 114

Base Unit Settings
Temporary Confidential
3
Configure the settings, then click [Save].
Setting
[IP Address]
[Subnet Mask]
[DHCP Server]
[Starting IP
Address]
[Number of Lease
IP Address]
Note:
L If you change the LAN side network settings or DHCP server settings, the entries in
Static DHCP table will be deleted.
4
Click [Restart].
114
For assistance, please visit http://www.panasonic.com/phonehelp
Description
L If your network administrator specifies the private IP address
and subnet mask, enter them in each data field.
L Set 4 digits (0 – 255) and 3 periods such as "192.168.0.253".
But "0.0.0.0" and "255.255.255.255" are not available.
L DHCP server assigns IP addresses to devices on your LAN.
Select whether to enable or disable this feature.
L Enter the starting IP address for the DHCP server's IP
assignment.
L Enter the number of the lease IP address (maximum
number: 5). The first IP address is assigned to the handset.
The subsequent ones are assigned to PCs.