Panasonic KX-WP1050 Operating Instructions Manual page 24

Getting Started
Temporary Confidential
AP (Bridge) mode - With an EXISTING ROUTER or MODEM with a
built-in ROUTER
If you install the base unit with your existing router or modem with a built-in router, the base
unit operates in AP (Bridge) mode. Select [AP (Bridge)] mode for your Internet
connection type in Initialization Wizard (page 27). In AP (Bridge) mode, the base unit
connects wireless devices to one another and to the LAN, and allows wireless devices to
use DHCP server on the LAN.
AC cord
To AC outlet
(120 V AC, 60 Hz)
1
Switch the Mode selector to "HOME".
2
Turn off your computer properly. Unplug any cable connecting your existing router (or
modem with a built-in router) to your computer. However, your existing router (or
modem with a built-in router) needs to remain connected to your cable or DSL modem.
3
Make sure the base unit is left unplugged. Connect the included Ethernet cable to the
"WAN" port on the base unit and an unused Ethernet (LAN) port on your existing router
or modem with a built-in router.
24
For assistance, please visit http://www.panasonic.com/phonehelp
Mode selector
Base unit
5
AC adaptor
To WAN port
1
To LAN port
Ethernet cable (not included)
3
Existing router
Ethernet cable (included)
WAN indicator
Computer
4
2
Cable or
DSL modem
Internet