Panasonic KX-WP1050 Operating Instructions Manual page 48

Getting Started
Temporary Confidential
Indicator Indicator
type color
WAN Green
Red
Amber
Green/
Amber
Off
48
For assistance, please visit http://www.panasonic.com/phonehelp
Indicator
Status
pattern
On An Internet connection has been
established (IP address obtained).
Flashing A data transfer is in progress on the WAN
side.
Flashing The base unit hardware may be defective.
L Visit
http://www.panasonic.com/phonehelp
On An Internet connection has yet to be
established (No IP address obtained).
Flashing The base unit firmware may be defective
and requires a firmware update.
L See "Setting the static IP address on
your computer" on page 148 for details.
Alternately The IP addresses on the LAN and WAN
flashing sides overlap.
L The network configuration of the LAN
side will be temporarily changed to avoid
the overlap of the LAN and WAN
networks. During this time, Port
Forwarding, DMZ, Packet Filtering and
Static Routing functions are disabled. To
activate those functions, change the LAN
network configuration.
– The Ethernet cable is not connected to the
Internet (WAN) port on the rear of the base
unit. Connect it.