Panasonic KX-WP1050 Operating Instructions Manual page 32

Getting Started
Temporary Confidential
5
Select the desired connection type used in HOME mode, then click [Next>].
L Internet connection modes vary according to the Internet service provider. Select a
connection mode referring to the Internet service provider's setup information.
L Select [PPPoE], [DHCP] or [Static] if the base unit is installed in Router mode.
Select [AP (Bridge)] if the base unit is installed in AP (Bridge) mode.
Setting
[PPPoE]
[DHCP]
[Static]
[AP (Bridge)]
L A screen with fields for configuring the connection type you select in this step is
displayed. See "Configuring the Internet connection settings" on page 36.
32
For assistance, please visit http://www.panasonic.com/phonehelp
Description
L This connection mode is usually required for use with DSL
modems.
L Allows the base unit to receive an IP address automatically
from a DHCP server. This connection mode is usually
required for use with cable modems.
L Allows the base unit to assign a specific IP address.
L Allows the base unit to work as an access point when you
have a router at home. ([AP (Bridge)] is not available in
HOTEL mode.)