Configure Routed Head Quarter - Nortel CS 1000 Manual

Configure Routed Head Quarter
Choose a system configuration.

Configure Routed Head Quarter.

Procedure 80
Choosing system configuration
Step Action
1 If you were referred to this procedure from
"Configuring System Settings" (page
Open the IP DECT Configurator, and click Modify.
2 Select the SIP DECT system that you are running, and click
System Configuration.
3 Choose Routed Head Quarter Configuration for System
configuration.
4 Enter a Time To Live Value greater than 1 to have the Router
forward multicast packages.
5 Calculate and enter the Aggregated Subnet mask.
The Aggregated subnet mask is the subnet mask for the DAPs
to determine the network boundaries for a SIP DECT System.
The Aggregated subnet mask covers the network segments
connected using routers that support IP multicast.
6 Perform one of the following steps:
If you were referred to this procedure from
"Configuring System Settings" (page
continue configuring the SIP DECT system using
"Configuring SIP Settings" (page
OR
Go to step 7.
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
Example: DAPs in three subnets:
•
192.168.1.0/24
•
192.168.4.0/24
•
192.168.5.0/24
For this example, enter the Aggregated Subnet Mask
255.255.248.0.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Routed Head Quarter configuration 147
Procedure 47
113), skip to step 3.
Procedure 47
113), click Apply, and
113).
Procedure 48