Reengineer Cells For High Traffic Areas - Nortel CS 1000 Manual

Too many cell centers The primary concern with deploying too many
cell centers is cost. To deploy the correct number of cell centers and
minimize cost, perform the following steps:
•
Verify the coverage and traffic volume before you add additional cells.
•
Remove a cell served by other cells unless it is required for high
handset density.
•
Verify the coverage area of each cell.
•
Verify that at least one area that each cell serves is not served by
another cell.
In the example in
is redundant unless required for high handset density.
Figure 31
Locating redundant cells
Reengineer cells for high traffic areas
To accommodate the demand in high traffic areas, follow
reengineering process" (page
Traffic volume
The deployment process ensures coverage throughout the service area.
It does not, however, take into account the effect of traffic. To support the
volume of telephone calls in cells that carry high traffic, you must increase
the number of cells deployed.
The calculation of expected telephone traffic includes an allowance for the
user population in a cell and for the roaming user.
Figure 31 "Locating redundant cells" (page
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
64).
System deployment 63
63), cell 1C3
"The cell