Edit A Subscription Rpn - Nortel CS 1000 Manual

194 System administration
5
6
7
8

Edit a subscription RPN

Change the DAP RPN to which the handset is subscribed.
Procedure 108
Editing a subscription RPN
Step
1
2
The status of the subscription record changes from Free to
Enabled and the Personal Identification Number (PIN) appears.
The DAP manager generates a PIN when it performs each
subscribe operation; the PIN appears only when the subscription
status is Enabled.
You can enable up to 10 extension numbers for subscription at
the same time.
ATTENTION
If you plan to create a multi-site configuration, use the option Enable
for multi-site instead of Enable.
Using the handset you are subscribing, Access the System
configuration menu, and choose New.
For information about accessing this menu, and other handset
configuration information, see the handset User Guide.
If the handset requests PARK code, enter the PARK code.
You can find the PARK code on the left at the bottom of the
Subscriptions page. A PARK code is required only if overlapping
DECT systems exist in your location; if only one DECT system is
available in your location, you need not use a PARK code.
Enter the displayed PIN code.
You must enter the PIN within 16 minutes; otherwise, the system
terminates the subscription mode for that extension number, and
you must start the subscription process from the beginning.
Enter the name of your SIP DECT system and the DN.
You can find the name of the system and the DN on the handset
display. The status of the configuring subscription record
changes from Enabled to Subscribed.
Action
Open Internet Explorer and enter the following URL in the
address field: localhost/cds.
The DAP manager IP DECT page appears.
Select Subscriptions from the menu on the left in the DAP
manager IP DECT page.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--