Mounting The Cabinet On A Wall - Nortel CS 1000 Manual

280 External housing installation
13
14
15

Mounting the cabinet on a wall

Mount the cabinet on a wall.
Step
1
2
3
Connect the antenna cables to the antenna.
Place the cover foam in position then place the antenna in the
foam.
Close and lock the outdoor cabinet.
ATTENTION
Ensure that the C4710E basestation is line powered through the
Ethernet cable. Local power provision is not possible in this outdoor
cabinet.
Action
Install the wall mount set on the back of the cabinet.
You can configure the wall mount set for vertical or horizontal
mounting; select the mounting style before you install the
mounting set on the cabinet.
Use the drilling jig to mark the positions where holes are needed
on the wall, and drill the holes.
You can configure the wall mount set for vertical or horizontal
mounting; ensure that you orient the jig to match the mounting
orientation you selected in the previous step.
Mount the cabinet to the wall.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--