Remove And Replace A Dap (If A New Dap Is Available) - Nortel CS 1000 Manual

6
7
8
9
10
11
12
13

Remove and replace a DAP (if a new DAP is available)

Remove and replace a DAP.
Remove and replace a DAP (if a new DAP is available) 223
Click Apply.
Click Save system.
Click Activate/Deactivate/System status.
Ensure the DHCP and TFTP servers are running.
Click Reboot to restart the DAPs.
Enter the following URL in an internet browser:
localhost/cds.
The DAP Manager appears.
In the Main panel, click Access Points.
The Access Points page appears.
On the Access Points page, ensure the new firmware (Package
ID) is uploaded successfully.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--