September 2016
9
Loosen the castle nut one full turn and then
torque to 35 ft-lbs / 47 Nm.
10 Install a new cotter pin. Bend the cotter pin to
lock it in place.
Note: Always use a new cotter pin when installing a
castle nut.
11 Install the dust cap, then the tire and wheel
assembly.
12 Lower the machine and remove the blocks.
13 Torque the wheel lug nuts to specification.
Refer to Specifications, Machine
Specifications.
Part No. 1268546GT
Z®-45/25 Bi-Energy • Z®-45/25J Bi-Energy
Service and Repair Manual
Steer Axle Components
59