Transparency Interleaving
When copying onto transparencies, this mode enables you to automatically add an interleaving
sheet of paper between each sheet of transparency that is output. The interleaf sheets protect
the copied surface of the transparencies. You can also set to copy the content of the
transparencies onto interleaf sheets.
IMPORTANT
• For information on the modes which cannot be set in combination with this mode, see "Unavailable
Combination of Functions," on p. 9-6.
• Even if an optional finisher is attached, you cannot use any of the Finishing modes with the
Transparency Interleaving mode.
• Only A4 is available for the Transparency Interleaving mode.
NOTE
• The Transparency Interleaving mode is available for the Copying function only.
• The machine's counter does not count blank interleaf sheets as copies.
• Regardless of the setting specified in the Tray Designation mode, transparencies are output to the
center output tray.
If You Do Not Want to Print on the Interleaf Sheets:
The [Leave Blank] setting outputs a printed transparency and a blank interleaf sheet alternately.
Originals
Blank Interleaf Sheets
Copies
Transparencies
Transparency Interleaving
4
4-29