Canon CLC5151 Copying And Mail Box Manual page 43

2
Place your originals
Select] [Stack Bypass Settings].
Normally, when reserved copying is not being set, the Stack Bypass Settings screen is
automatically displayed when paper is loaded into the stack bypass.
3
Select the desired paper size.
NOTE
• If you select [Envelope], [Tracing Paper], [Transparency], [Labels], [Tab Paper], or [Washi (JPN
paper)], make sure that you do not specify any Finishing modes (Collate, Group, or Staple).
• If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is
set to 'On', and the paper size/type have been stored, the selected paper size/type are displayed
on the screen. (See Chapter 4, "Customizing Settings," in the Reference Guide.)
If you want to select a standard paper size:
Select the desired paper size
NOTE
To select an inch paper size, press [Inch-size].
Select the desired paper type
If you are copying onto the back side of a previously printed sheet, press [2nd Side of
2-Sided Page].
NOTE
[Transparency] can be selected only if [A4] or [A4R] is selected as the paper size.
set the desired copy modes
press [Next].
press [OK].
press [Paper
1-23
Reserved Copying
1